Range

Arrangement	Drive	Max. Pressure (Pa)	Max. Flow Rate (m³/s)
3J & 3Z	V-belt drive	5600	45
1J & 1Z	Direct drive 1500 tr/min	5400	30
1J & 1Z	Direct drive 3000 tr/min	5400	8

Families

C14A, L14A, M14A

Accessories

Fans come supplied with:

• Casing drain
• Discharge flange
• Inlet flange
• Inspection door on fan casing

Other available accessories:

• Actuator
• Anti vibration pads
• Base frame
• Discharge damper
• Electric control
• Electric motor
• Flexible joint
• Flexible sleeves (with or without deflector)
• Frequency regulator
• Inlet casing
• Inlet counter flange
• Inlet filter
• Inlet regulator
• Inlet screen
• Outlet counter flange
• Outlet screen
• Silencer
• Swing-out opening

Special configurations

• Project-related modifications
• ATEX configuration (for use in Potentially Explosive Atmospheres)
• Gas-proof
• Temperatures from -50 °C up to 800 °C
• Diameters up to 3150 mm and capacities up to 1000 kW
• Removable fan casing
• Materials adapted to any type of gas (carbon steel, aluminium, titanium, chrome/nickel alloy, ...)
• Coating adapted to the environment (alkyd paint, epoxy powder, galvanizing, metalizing aluminium or zinc, ebonite, cataphoresis, ...)

More about the special configurations.

More about the airfoil blades

Because of the aircraft wing profile shape of the blades, the fluid is discharged with a minimum of turbulence, shocks and loss in the impeller. This results in a silent operation, low input power and high efficiency.

As each blade forms a box beam which can be stiffened on the inside, an airfoil bladed impeller is mechanically very strong and allows for very high operating speeds.

This blade is particularly well suited for wide impellers, both from an aeraulic and mechanical point of view.

This blade is generally used for clean gas but is also suitable for gas charged with dust even if clogging (except for the C14 family).

It is not suitable for gas charged with abrasive dust.